The photo above shows the internal workings of a New Process 231 transfer case, which was used on part-time four-wheel drive Jeeps, Chevys, and Dodges from 1988 through 2006.

A disconnect switch, sometimes referred to as an isolator, load-break, or safety switch, is a device designed to isolate a building, appliance, or circuit from its power source.

In its most basic form, a transfer switch for a 120/240V single-phase service is simply a double-pole, double-throw switch of proper ampere rating with a middle off position (Fig. 1). By design, it is ...

With Smart Switch, you can transfer your data over Wi-Fi or using a USB connection. No matter which method you choose, the process is quick and seamless.

Third, a transfer switch test transfers building load onto the generator for the duration of the generator test. Most standby power generators of more than 100kW are diesel engine driven, and all ...

A transfer case usually sits near the middle of a vehicle's undercarriage and is responsible for sending power from the transmission's output shaft to one or both axles depending on the driver's ...