For example, a 50% duty cycle will have the circuit load “on” for half the time. In this project, we’ll apply a variable PWM signal to control the intensity of an ancient evil object.

Figure 2 Proposed PWM generator circuit. This simple yet powerful circuit is extremely compact to integrate on a chip. For example, a 10MHz version of the circuit, including a driver for a 10pF ...

Operation of the new circuit relies on series connected capacitors C1 (which makes the PWM DC voltage component) and C2 (providing the inverted ripple component). Voltage summation is inherent from ...

Ideally, I suppose a solution would be to generate a ramp that was synchronized with the pwm signal, and use a sample and hold circuit to grab the ramp’s voltage when the pwm’s edge appeared. In your ...

PWM or Pulse Width Modulation has generally been regarded as too complicated for PC fan speed control compared against using rheostats or linear voltage regulators such as the LM317.

For example, using the same value of resistors on two PWM pins increases the resolution by one bit. Two pins with a resistor value ratio of 1:4 increases the resolution by four bits, and so on.

It takes two (or three, or one) MCU pins and needs an internal digital feedback loop, with the MCU putting out different pwm ratios into the RC network until the MCU measures the desired voltage at ...

For example, low-power op amps can be used in a low-power system, and high-frequency op amps can be used for a high-frequency PWM. The circuit in Figure 1 also generates a triangular wave.