If the input terminal is connected to the forward voltage, then the current flows through the P-channel MOSFET’s body diode to the load terminal. If the forward voltage exceeds the P-channel MOSFET’s ...

A traditional PN-junction diode can perform rectification, which isn’t the case with a Gunn diode since it conducts in both directions. But because its two terminals, both with negative dynamic ...

Diodes are fundamental building blocks in electronics. Their most basic function is controlling the flow of current. Unlike a wire that conducts in both directions, a diode acts as a one-way valve for ...

In this article, we will explore the basic functions of the Zener Diode. This device resembles a compact cylinder, much like the conventional diode, with two terminals at the ends that can be wired or ...

2.3. Bevel Mesa Terminal Structure There are two general types of bevel mesa structures, positive bevel angle and negative bevel angle. In practice, negative bevel angle mesa terminal structures are ...

The “control” side of the circuit includes a current-limiting resistor R2 and a protection diode D3. These components are crucial for preventing stress on the TLP3906 in case the CONN1 connector ...

A diode is an electronic component about 5 mm wide. It has two points of contact, or terminals, called its anode and cathode.

Reverse-Biased: A condition where the diode's anode is connected to the negative terminal of the power source, resisting the flow of current. PIN Diode: A type of diode with a wide, undoped intrinsic ...

You can use these steps to test a Zener diode circuit: measure the output voltage with a multimeter and compare it with the Zener voltage; measure the current through the series resistor and ...