This is a very simple LED dimmer circuit which has 2 transistors, 1 resistor and 2 potentiometers. Typical segment displays LEDs consume around 25 mA for each segment and should be limited to this ...

Choosing athree-cell, 4.5V supply results in a lowervoltage of 0.33V per cell. A 4.5V supplycan power as many as eight LEDs.Tests show that this circuit works from4.5V to 0.94V, which is lower than ...

If you’re working with 3.3V or 5V circuits, it’s easy for you to throw on a power or status LED here or there. [Tom Gralewicz] has found himself in a pickle, though, often working on pr… ...

This DIY gas leakage detector is designed for educational and basic monitoring purposes. For critical safety applications, ...

If you’re looking to control WS2812 (or Neopixel) LEDs using a microcontroller running at 3.3 volts, you might run into some issues. The datasheet tells us that a logic high input will be det… ...