As I've experimented and played with a lot of different sensors, I've discovered that these basic devices can be built for ...

Cooking is all about temperature control: too cold isn’t good enough, and too hot can ruin everything. To aid in this regard, ...

Bogdan Micea] uses a laptop cooler, but was a bit annoyed that his cooler would run at the same power no matter how hard the laptop was working. Rather than keep adjusting the cooler’s power ...

A linear transimpedance amplifier (TIA) for a 53 GBd PAM-4 optical link to support 100 Gb/s data on a single wavelength is reported. Designed in a 16 nm FinFET CMOS process, the chip consumes 60.8 mW ...

A simple Arduino inline extension to Chinese Diesel Heaters to help maintain a stable temperature by gracefully shutting down the heater if it gets too hot, or turning it on if it gets too cold.

Thermometer-to-binary decoders for flash analog-to-digital converters Publisher: IEEE Cite This PDF ...

📖 Project Overview This IoT project monitors the temperature and humidity in a server room using an ESP32 and DHT11 sensor. Readings are published to a ThingSpeak channel every 20 seconds, and alerts ...