Kajnjaps is a pseudonym for one of the authors of the IEEE paper titled “ Simple Two-Transistor Single-Supply Resistor-Capacitor Chaotic Oscillator.” The circuit uses a lowering potentiometer ...

So, it seems that a known topology of a classical periodic oscillator can be modified with the inclusion of some additional components to generate chaos. Moreover, the Chua’s circuit, invented in 1983 ...

TV to FM Converter Circuit A BF494 transistor, along with resistors R1 and R2, is used to bias the transistor. Capacitor C1 is connected to the base of T1 and the +9V supply, while capacitor C2 is ...

Oscillator frequencies can be calibrated. Couplings or synapses are implemented with a four-terminal six-transistor circuit, which conductive characteristics are determined by two voltages, allowing ...

"We decided to use a type of chaotic oscillator that is extraordinarily simple, involving only one transistor and a handful of passive components, and known as the Minati-Frasca oscillator.

RC Phase Shift Oscillator A simple RC phase shift oscillator provides a minimum phase shift of 60 degree. Above image is showing a single pole phase shift RC network or ladder circuit which shifts the ...

James Clapp is credited with inventing the Clapp oscillator in 1948, although the circuit had been in operation at the BBC ten years earlier. The three capacitors form a voltage divider that ...

Download this article in PDF format. This article continues where Part 1 left off with a discussion of the push-push oscillator topology. The push-push oscillator circuit topology joins two ...

The output amplitude is around 4.3 V using a 3.5 V supply. NDR oscillator output at 5.1 kHz Keen eyes might notice a component missing in the simple schematic.