It should work just fine that way - 3.3V at 1000Ω is 3.3mA, which is well within the capabilities of a properly configured Raspberry Pi ... sensor and assembly is ok, you should get back ...

In this module, a waterproof temperature sensor is used to measure the temperature and relay the measured temperature data to a Raspberry Pi. A software application implemented using the Python3 ...

GY-906 is an easy DIY Raspberry Pi project using inexpensive materials like PICO, GY-906 sensor, OLED display, push switch, ...

and Raspberry Pi Sense HAT. – DHT22 — This temperature and humidity sensor has temperature accuracy of +/- 0.5 C and a humidity range from 0 to 100 percent. It is simple to wire up to the Rasp ...

Essentially, one Raspberry Pi acts as a surveillance camera and temperature sensor, while the other Raspberry Pi acts as a remote display. You can view the feed of the camera using a touchscreen ...

[Harald Kreuzer] needed both and built a Raspberry Pi Weather ... for sensor node address setting, a voltage divider to measure battery voltage, a BME280 sensor that provides temperature, humidity ...

Anything that has GPIO and can talk to a temperature sensor is enough to build a thermostat. As you all know, however, I have committed to a building a Raspberry Pi into every room in my house ...

There are all sorts of handy tools out there, and a handful of them can be made from scratch with a Raspberry Pi ...

To build your very own IoT rain checking system, you will need a Raspberry Pi 3 Model B, a DHT11 Temperature & Humidity Sensor (4 pins), and a raindrop sensing board, which can be purchased for ...

DHT22 — This temperature and humidity sensor has temperature accuracy of +/- 0.5 C and a humidity range from 0 to 100 percent. It is simple to wire up to the Raspberry Pi and doesn’t require any pull ...