As a side note, for those looking to make their own pwm mosfet modules, here are some recommended mosfets: For a quick test, I chose a 12V Coin LED as the output load and used an Arduino PWM signal as ...

Chinese Digital PWM modules have come down in cost over the past few months, but picking a PWM module that will help you to do what you need actually means you have to think about a host of things, ...

The Verilog module pwmblock (and its related wrappers ... cycle measurements near the bottom of the screen. The output is proportional PWM, so note the frequency changes (about 6 MHz at 50% ...

In an actual transmitter, this combination of PWM and H-bridge RF amplifier is usually on one board (or card), and a number of these boards are combined within a power module, depending on the power ...

Murata has got together with German chip firm ZMDI to produce the Power Block, a small (13x17x11mm) module that includes all the components necessary to make a non-isolated 25A step down dc-dc ...

This single-chip, highly integrated active-clamp current-mode PWM controller solution is designed for isolated power supply and Power over Ethernet (PoE) Powered Devices (PD) and significantly ...

Supporting a wide input voltage range of 4.5 V to 65 V, an output current of up to 10 A and ... the FAN65008B/5A/4B PWM buck converters deliver extremely low parasitics in the power path.

Vishay has announced power stages for synchronous buck converters that allow a logic-level PWM signal to control 70 ... and memory; and DC/DC VR modules. A nice block diagram would have been included ...

Unfortunately, the conversion of a digital output to an isolated current-loop ... provides galvanic isolation of the PWM input. It uses this input to chop the 1.25-V reference voltage of the ...