After the end of the pre-order phase, the Xreal One Pro officially goes on sale – with a larger field of view, flatter design ...

Seeed Studio's reComputer Mini is a small carrier board for the NVIDIA Jetson Orin Nano or Jetson Orin NX module that's ...

Precision sensor supplier Micro-Epsilon has launched a new portfolio of 100% in-house developed non-contact infrared ...

Could this HikMicro Habrok 4K resolution ‘multi-spectrum’ binocular be ideal if you want to keep eyes on your subject, day or ...

A demonstrator relying on the micro-CPV module achieved efficiency of 36% based on IEC62670-3 concentrator standard test conditions. June 5, 2025 Valerie Thompson ...

The USB 3.0 interface boasts theoretical speeds of up to 5Gb/s or 625MB/s (actual performance is determined by the speed of your card). The card reader has slots for both Micro SD/SDXC and full ...

It’s 2025, and I had to buy a Micro USB to USB-C cable. It’s 2025, and I had to buy a Micro USB to USB-C cable. Victoria Song is a senior reporter focusing on wearables, health tech, and more ...

TL;DR: Morse Micro has introduced the MM-HL1-EXT, a Wi-Fi HaLow router that promises to advance long-range, low-power communication. This device, part of the HaLowLink 1 series, uses the IEEE 802 ...

EvilDuck enables anyone to build a powerful USB keystroke injection tool with simple hardware. It’s inspired by the original USB Rubber Ducky but allows for more flexibility by using a customizable ...

You might notice that I’m using a simple micro-USB breakout board instead of a USB to UART module. This is because I had already programmed the ESP32, and the image was taken during a working ...

In the “boot” folder, find the config.txt and add the following: dtoverlay=dwc2,dr_mode=host This will turn on the USB ports when you boot up, but if you accidentally keep the micro USB in, you will ...

The Micro's bootloader is also bigger at 4 KB, so you can only use smaller sketches with this board compared to the Nano. The main advantage of the ATmega32U4 is that it can communicate over USB ...