Hi, I'm Bill. I'm a software developer with a passion for making and electronics. I do a lot of things and here is where I document my learning in order to be able to inspire other people to make ...

Introduction: The Rise of the Maker Revolution Over the last decade, the open-source movement has not only transformed the world of software, but also catalyzed a sweeping revolution in hardware ...

Hi, I'm Bill. I'm a software developer with a passion for making and electronics. I do a lot of things and here is where I document my learning in order to be able to inspire other people to make ...

Toshiba is aiming at UART and SPI interfaces with three four-channel dual-supply level-translator-transceivers. “The bus transceivers support level-up and level-down voltage translation from either of ...

The pilot tones-based Doppler shift (F1), which is not contaminated by the heavy CFO corrections, achieves positioning with meter-level accuracy. Using the OFDM-based Doppler shift in its raw form (F2 ...

Motor power for the Level 3 has changed slightly compared to its predecessor. Though the continuous rating for the rear-hub drive remains at 500 watts, peak power has jumped to 864 watts for up to ...

The new products introduced today feature PMIC and level-shifter technology stemming from Magnachip’s research and development activities since 2019, and they provide the benefits of enhanced ...

By now, 3.3V has become a comfortable and common logic level for basically anything you might be hacking. However, sometimes, you still need to interface your GPIOs with devices that are 5 V, 1.8 V… ...

Why GPS does not work underwater Water and air are two very different mediums through which communication signals travel. On a molecular level, water is denser. Though you can't see them, air ...

Qualcomm Technologies and Xiaomi have verified meter-level positioning in the Xiaomi 12T Pro powered by the Snapdragon 8+ Gen 1 mobile platform, in Germany. Accuracy verification tests, including ...

The MLX90392 magnetometer communicates with the microcontroller over I 2 C at 1.8 V. Normally, this would require an external level shifter, but since the MVIO is available on the microcontroller, no ...