News

Kelvin probes are a special type of probe for making accurate resistance measurements using four wires and, in fact, the probe’s jaws are electrically isolated from each other.
Measuring the electrical resistance (ohms) of motors, compressors, and other electrical devices in HVAC systems may seem straightforward. But when the measurements of zero (0) or “OL” (overload) come ...
Stepper motors contain coil windings that require resistance measurements. Measuring resistance in a production environment often requires some special circuits that minimize errors. Resistance is ...
The circuit in Figure 2 meets these requirements and accurately measures internal resistance over a range of 0.001 to 1Ω at battery voltages as high as 13V. One section of an LTC6943 analog switch, IC ...
OF all electrical measurements probably that of measuring a resistance is the most important, since the resistance of many bodies is a permanent quality, and resistances can be compared by means ...
In-circuit tests check the workings of an application, i.e., white-box testing. Here, we use an electric probe to check the populated PCB for shorts, opens, resistance, capacitance, and other ...
Insulation failure is the root cause of many electrical conductors and equipment failures. When insulation fails, not only can equipment be damaged, but fire and shock can also result. Ideally, when ...
GROUND RESISTANCE MEASUREMENT There are plenty of resources on the internet about ground resistance measurements. For making these measurements, I chose the Fluke 1625 earth resistance meter, seen in ...
Measurement of short-circuit impedances For the short-circuit impedance test the primary winding will be short-circuited. At the secondary winding an AC current signal is injected and the resulting ...
However, these indirect testing methods require complex calibration and are easily affected by external interference. In contrast, four-point probe (4PP) sheet resistance (Rs) measurement can provide ...
While ac internal resistance (ACIR) measurements are quite common and somewhat standardized when measuring lithium-ion cells, dc internal resistance (DCIR) measurements are nonstandard and ...