I came across this touch-LED PWM module. To be honest, while it was a complete module and it made an overall good impression, the documentation made me a bit wary. Looking closely at the little ...

As a side note, for those looking to make their own pwm mosfet modules, here are some recommended mosfets: For a quick test, I chose a 12V Coin LED as the output load and used an Arduino PWM signal as ...

If you want to experiment with the code, try changing to drive a different LED or maybe ... controlling the PWM blocks Adding new blocks isn’t difficult at all. The Verilog module pwmblock ...

Multiple modules can be chained together for bigger ... Bit 30 (0) signals an LED PWM update command, followed by a 100% setting for the blue channel (1111111111) and 0% settings for the red ...

RCL module implemented with TLD2252-2EP. PWM signal externally synchronized with both output ... Infineon is an application engineer at Infineon Technologies responsible for automotive LED drivers.

If you replaced your halogen headlights with an LED kit and notice them blinking in and out, you might want to try installing a pulse width modulation (PWM) connecter. This module will manage ...

Applying PWM switching to the LED outputs can be particularly troublesome with regards to EMI. To optimize EMI performance, the IS31FL3248 includes a programmable spread spectrum function to lower ...

The LT3952 has a gate driver for a PMOS LED disconnect switch, delivering dimming ratios of up to 4,000:1 using an external PWM signal. For less demanding dimming requirements, the CTRL pin can be ...