or pwm control like dimming a set of lights. An important point to note is that this module demands a 5V TTL control signal input and a minimum 12V output/load switching voltage to provide a ...

Okay, let’s get to the point of this post. My intention is to see if I can get 0-10V output from 0-100% PWM input through this module. This is a copy-paste of the operating instructions provided by ...

The Verilog module pwmblock (and its related ... you have lots of options. Digital input and output would be simple. PWM can be used to drive lights or motors. You could even use it to drive ...

The output of the comparator op-amp is connected to a driver IC which has a high input/output ... combination of PWM and H-bridge RF amplifier is usually on one board (or card), and a number of these ...

PWM controller with soft start function for DC to DC boost converter, UMC 0.13um HS/FSG Logic process. View DC-DC IP, Step-up PWM Regulator, Input: 3.0V - 3.6V, Output: 5V/100mA, with soft-start, UMC ...

This KTB2140 current-mode PWM controller can operate as an active-clamp flyback or forward converter, with a wide 8V to 80V input range. It is optimized for highest efficiency with best-in-class ...

Supporting a wide input voltage range of 4.5 V to 65 V, an output current of up to 10 A and ... the FAN65008B/5A/4B PWM buck converters deliver extremely low parasitics in the power path.

View DC-DC IP, Step-down PWM Regulator, Input: 3.0V - 3.6V, Output: 1.8V/200mA, with soft-start, UMC 0.13um HS/FSG process full description to ...