This screen has the same resolution, 800 x 480, as the Official Raspberry Pi Touchscreen and that’s awfully small. I keep hoping someone will produce a DSI screen for the Pi that has better ...

Yes, finally, and after years of work and countless people complaining on forums, there is a proper, official display for the Raspberry Pi. It’s a 7-inch display, 800 x 480 pixel resolution, … ...

A year after it was first announced, the Raspberry Pi touch display finally launched on Tuesday.The new component means Raspberry Pi hackers can now experiment with an officially sanctioned 7-inch ...

The display has an 800×480 resolution, 10-finger capacitive touch capability, and an adapter board that is used both to power the display and connect to the Raspberry Pi with a DSI ribbon cable.

While Kooha works pretty well with the Raspberry Pi, its supported video formats are limited to only WebM and GIF. If you ...

The Raspberry Pi Touch Display 2 has a higher resolution than the original ... The Raspberry Pi Zero is the only exception, as the system-in-a-package board does not include the required DSI port.

The Raspberry Pi team is back with a new small-but ... You will also find the usual 40-pin header and MIPI camera/display ports ... MIPI CSI/DSI, analog TV. This leaves HDMI, SDRAM and PCI ...

The Raspberry Pi Touch Display 2 has a resolution of 1280 x 720 pixels, and can be combined with the Raspberry Pi series to create a tablet-like device. Raspberry Pi Touch Display 2 – Raspberry Pi ...

Raspberry Pi monitor No display after boot 1] Make sure that you are using the correct PSU. The newly released Raspberry Pi 5 requires a 27W USB-C power supply to function properly.

Power (provided from the Pi) and data cables are included for both DSI connector formats the company uses. These are: standard and mini. Touch Display 2 will remain in production until 2030 at the ...

While Kooha works pretty well with the Raspberry Pi, its supported video formats are limited to only WebM and GIF. If you prefer your screen recording output as MP4 but don't want to use the ...