This circuit is effective for low-power laser diodes but may not be so for diodes with power dissipation greater than 150 mA. The maximum cutoff current of the JFET sets this limit. If it becomes ...

where Np and Ns are the transformer’s primary and secondary windings, respectively. Considering the power level of a high- to low-voltage DC/DC converter and the power losses of a ...

TVS Diodes in Hot-Swap Systems. ... Using Equation (2), calculate the circuit clamp voltage, V C, given the I P level derived from step 2 and the relevant datasheet parameters.

It is the same circuit as the classic simple precision rectifier (set to pass the negative half-sine), but with the non-inverting input of the op-amp connected to the voltage-to-clamp-to rather than ...

Typical clamp diodes that are suitable for deployment here include the 1N4148, MMBD2004, ... This is necessary when a clamp or thyristor circuit is insufficient to keep voltage and current at safe ...

The active Miller clamp circuit has a channel resistance of 0.69Ω (typ.) and a peak clamp sinking current rating of 6.8A, making it suitable as a gate driver for SiC MOSFETs, which are highly ...

A superconducting diode bridge composed of four superconducting diodes efficiently converts AC to DC at cryogenic temperatures, achieving rectification efficiencies up to 42% ± 5%.