This circuit is effective for low-power laser diodes but may not be so for diodes with power dissipation greater than 150 mA. The maximum cutoff current of the JFET sets this limit. If it becomes ...

where Np and Ns are the transformer’s primary and secondary windings, respectively. Considering the power level of a high- to low-voltage DC/DC converter and the power losses of a ...

But unlike the diode clamp, it can be activated anywhere in the sync interval, and not just during the sync tip. If the key signal occurs while the video is at the black level ( Fig. 4c ), you get ...

TVS Diodes in Hot-Swap Systems. ... Using Equation (2), calculate the circuit clamp voltage, V C, given the I P level derived from step 2 and the relevant datasheet parameters.

A superconducting diode bridge composed of four superconducting diodes efficiently converts AC to DC at cryogenic temperatures, achieving rectification efficiencies up to 42% ± 5%.

It is the same circuit as the classic simple precision rectifier (set to pass the negative half-sine), but with the non-inverting input of the op-amp connected to the voltage-to-clamp-to rather than ...

The active Miller clamp circuit has a channel resistance of 0.69Ω (typ.) and a peak clamp sinking current rating of 6.8A, making it suitable as a gate driver for SiC MOSFETs, which are highly ...